Product
BRANSON、BRANSON、2000ea/aeD ultrasonic plastic welding machine
BRANSON、BRANSON、2000ea/aeD ultrasonic plastic welding machine

2000d/aed type ultrasonic welding machine mainly provide time, energy, peak power, grounding detection, relative distance, absolute distance and so on the many kinds of welding mode.

- 2000 - x f/aef type ultrasonic welding machine is mainly to provide time, energy, peak power, grounding detection, relative distance, absolute distance and various welding mode.

2000 x series of various types of ultrasonic welding system can be applied to manual, semi-automatic or fully automatic production environment, to provide accurate and efficient welding.

Product main features:

Electronic amplitude control

Amplitude is a more important variable in ultrasonic welding. Through electronic amplitude control can adjust the amplitude of the size of the design and function, and is not affected by input voltage and load fluctuation is stable under the condition of the amplitude of the output.

The amplitude change

Amplitude can be instantly increase or decrease in the welding process, the user can input amplitude control signals from outside. Work amplitude set in the range of 10% to 100%. (see figure 1)

The power supply voltage

When the power supply voltage fluctuate within + / - 10%, the amplitude of the resulting drift range is only + / - 2%. BWp unique closed loop can compensation due to the power supply voltage fluctuation amplitude control function (see figure 2) and the amplitude of the change.

Load regulation

Regardless of load changes, the generator will ensure the transducer output selected amplitude (see figure 3).

Power vs. amplitude Settings

Change amplitude can make to achieve the maximum output power changes. Through electronic amplitude control can achieve a more stable linear relationship between amplitude and power (see figure 4).

FM frequency and stored automatically

Use 40 kHz welding head can be within the scope of 39.9 kHz + 1000 hz for automatic frequency modulation. Every time the welding at the end of the working frequency will be stored.

Frequency automatic search

Can automatically determine the operating frequency welding head and storage, equipment provides the choice of the ways of four search frequency:

1. Open the equipment power supply is to search

2. Through external control of its search frequency

3. Press the "test" (test) switch

4. Names only triggered repetition frequency automatic search/minutes to make up for welding head frequency drift caused by heat or other factors

System protection monitor (SPM)

Provide five for generator protection:

(1) frequency deviation is too large (2) high voltage current 3) 4) too much power 5) temperature is too high

The circuit system can be effectively avoided in the operation of the equipment failure, provide higher precision of welding, reduce rejection rate.

Improved power measurement

After every set amplitude by measuring the output voltage and current to measure the output power. Power can be at 5% increment through the LED display meter. Generator output 100% rated power, the load table full screen.

    The company is specialized in selling ultrasonic plastic welding machine, ultrasonic metal welding machine, ultrasonic cleaning machine, high frequency welding machine, hot plate welding machine, non-standard automatic customization,BRANSON ultrasonic, American DUKAEN ultrasonic, Swiss RIVOC ultrasonic, GermanHellmann ultrasound, etc.

Plastic welding series: 15KHZ/20KHZ/30KHZ/35KHZ/40KHZ
Metal welding series: 20k/40k ultrasonic metal spot welding machine, roll welding machine, wire harness shaping machine, metal sealing machine, pressure welding machine and battery welding machine
 
Ultrasonic transducer, converter, vibrator series: 15KHZ/20KHZ/30KHZ/35KHZ/40KHZ
 
Amplifier, amplifier, horn series: 15KHZ\20KHZ\30KHZ\35KHZ\40KHZ\Titanium alloy, aluminum alloy
 
Ultrasonic rubber cutting knife series: 40KHZ ultrasonic cutting knife, 20KHZ ultrasonic cutting knife, ultrasonic food cutting knife
 
Electro-pneumatic accessories series: atomic energy transistor / main board / control board / protection board / solenoid valve / cylinder,
 
Ultrasonic mold head series: 15KHZ, 20KHZ, 30KHZ, 35KHZ, 40KHZ ultrasonic mold head, 40KHZ, 20KHZ ultrasonic mold head / ultrasonic metal spot welding mold, vibration friction mold, non-standard welding machine
 
Continuous wave welding machine / large automatic ultrasonic plastic welding machine, non-standard ultrasonic metal welding machine and automation equipment consumables and processing.
 
Imported domestic and foreign equipment can get quality assurance and experienced technical services here!
 
Company Tel: 0769-87698695 Straight line consultation: 13925567802
 
Contact: Mr. Yang Company website: http//:www.bndcsb.com

 

BRANSON, BRANSON ultrasound, DUKAEN, duken ultrasound, RINCO,ringo ultrasound, HELLMANN, HELLMANN ultrasound

 

BRANSON, BRANSON ultrasound, DUKAEN, duken ultrasound, RINCO,

ringo ultrasound, HELLMANN, HELLMANN ultrasound

 

BRANSON, BRANSON ultrasound, DUKAEN, duken ultrasound, RINCO, ringo ultrasound, HELLMANN, HELLMANN ultrasound

 

BRANSON, BRANSON ultrasound, DUKAEN, duken ultrasound, RINCO, ringo ultrasound, HELLMANN, HELLMANN ultrasound

 

BRANSON, BRANSON ultrasound, DUKAEN, duken ultrasound, RINCO, ringo ultrasound, HELLMANN, HELLMANN ultrasound

 

BRANSON, BRANSON ultrasound, DUKAEN, duken ultrasound, RINCO, ringo ultrasound, HELLMANN, HELLMANN ultrasound

BACK